Данный сайт содержит файлы Cookies. Узнайте подробнее о цели их использования - ознакомьтесь
с нашей политикой конфиденциальности. xПользуясь данным сайтом, Вы выражаете
согласие на использование файлов cookie в соответствии с актуальными настройками браузера.

Новинки

2018-11-19Meet us BIG 5 Dubai 2018

Meet us BIG 5 Dubai 2018

Join ALNOR team at the largest fair trade in the Middle East - Big 5 in Dubai between 26 - 29 November 2018.

We are exhibiting with both our standard products like fittings and silencers as well as brand new ones - round and square fire dampersVAV and CAV volume regulators.

You are very welcome in Hall Zabeel 5, booth Z5 D70 to talk with us about cooperation.

czytaj więcej

2018-09-04Meet us at SMM 2018

Meet us at SMM 2018

Join ALNOR team at the largest fair trade for Marine industry in Germany SMM 2018 in Hamburg between 4-7.09.2018. 

We're presenting 5 complete ventilation systems for marine applications: pre-insulated ductwork with 10, 16 and 25mm insulation, air insulate ductwork and aluminium system, as well as offshore ventilation system made of stainless steel.

You are very welcome in Hall B5, booth B5.516 to talk with us about cooperation.

czytaj więcej

2018-07-18Вихревые диффузоры

Вихревые диффузоры

Потолочные вихревые диффузоры GCR:

  • изготовлены из листовой стали и покрашены порошковой краской белого цвета (RAL 9010),
  • диффузоры обеспечивают смешивание свежего воздушного потока с комнатным воздухом,
  • предназначенные для помещений высотой до 4 м, например, в общественных помещениях, таких как офисы, спорткомплексы, гостиницы, офисы, магазины, рестораны, кафе,
  • типы соединения:с соединительным ниппелем или с муфтой воздуховода, с перфорированной крышкой или без нее,
  • широкий диапазон размеров: 125 - 400 мм.

Technical sheetDownload the pdf file for Swirl Diffusers GCR

These and other products for ventilation and heat recovery can be found in the PRODUCTS section 

czytaj więcej

2018-06-07DAT-AKU - клапан-глушитель для каналов воздуховода

DAT-AKU - клапан-глушитель для каналов воздуховода

 

клапан-глушитель для каналов воздуховода:

  • made of polyurethane foam,
  • regulation of air flow and noise suppression in the ventilation system,
  • thickness: 50 mm or 75 mm,
  • non-combustible material (class B2 according to DIN4102-1),
  • a wide range of sizes,
  • the possibility of using several dampers at a time in the ventilation duct.

czytaj więcej

2018-06-07Over 1000 products in one place!

Over 1000 products in one place!

 

Get to know our Product Range – Check our Product Overview! On 44 pages we’ve shown over 1000 products, described more than 10 ventilation systems and reviewed all our certificates, technical approvals as well as selection software that supports our clients. 

Examples of our ventilation systems:

  1. The SPIRAL-System is a proven system of quick-coupled spiral ducts and fittings provided with factory-installed EPDM gaskets. The gaskets provide leak-proof and durable joints between SPIRAL®system components. The system components are available in a full range of diameters from Ø80 to Ø1250 mm. SPIRAL system meets the requirements of PN-EN 12237 for air tightness class D (Certificate no. 0103/07).
  2. Components of the FIX-System suspension are made from galvanized steel or stainless steel and they meet the requirements of the BRI (ITB) Technical Recommendation no. RT ITB - 1112/2008 Includes: EQVS, EQZS, EQLS, CLR, CLRL, TKN, KLQ, PG, TK, LDB, PB.
  3. Roof installation accessories are a range of fixtures and tools for easy and safe suspension of round and square ventilation ducts. Roof installation accessories are a range of modular roof support kits and roof feet, as well as other accessories that make the assembly easy and fast. Sets of roof supports can be used on flat roofs and slightly sloped roof. Roof support kit consist of perfectly matched elements - roof feet, sections of channel, screws, nuts, etc.
  4. FLX-REKU is a complete ventilation system which comprises ventilation ducts, plenum boxes, air dampers and other components for building ventilation solutions with heat-recovery units. The system comes very handy when heavy-duty and flexible ducts are required. The high circumferential rigidity allows burying the ducts in concrete.
  5. The EPP duct system is made of expanded polypropylene. The system has a number of design and installation advantages: low weight, quick installation (no additional connectors or screws required), no additional insulation is required since the material itself is already an insulator, easy to cut using hand tools, no thermal bridges. Thermal conductivity: λ=0.039 [W / m * k].
  6. SQUER-System - rectangular ducts and fittings.
  7. The IZOL®system is a registered tradename of pre-insulated ventilation ducts and fittings for indoor and outdoor systems. All system components are provided with inner and outer steel sheet cladding, and a thermal-insulation layer in between. The nominal diameter range of 100-500 mm always refers to the inner diameter of ducts and fittings. There are 3 types of insulation  available: 25 / 50 / 100 mm.
  8. Ducts and fittings insulated with rubber foam Fovent®system. The insulation made of rubber mat is available in 4 sizes: 9, 13, 19 and 25 mm.
  9. Insulated fittings IZOL-SAFE System designated for marine applications. Bend with air-insulation and duct with wool based insulation.
  10. OFF-SHORE ventilation ducts and fitting - Circular ducts and fittings made of galvanized metal sheets, stainless steel 1.4404, wall thickness in stainless steel fittings from 0,8 up to 1,25 mm depending on diameterr. Swelling gasket for high temperatures purposes.
  11. Ventilation systems made of plastics are widely used in many areas and sectors where the conventional materials, such as plated steel or stainless steel become insufficient due to their limitations. Plastics have traditionally been used in laboratories, chemical industry or spaces of high purity grade.
  12. TRANS-Quick is a modern clamp-together ducting system intended for industrial dust extraction. Quick assembly and disassembly, using pull rings to connect components - which can be reused and reassembled.Ducts and fittings are manufactured from galvanised steel sheet 0.7 and 0.9 mm in thickness using butt welding method, components are joined with clamps equipped with a gasket.
  13. Circular smoke extraction ducts and fittings SMOKE-SYSTEM.

 

In our product offer You can also find:

  • Heat recovery unit
  • Filters prevent contaminants from flowing with the air supplied into rooms and ventilation ductwork.
  • Valves and ventilation grillse
  • Ventilation duct silencers
  • Ventilation dampers, vav flow regulatores and actuators
  • Duct heaters
  • Access doors 
  • Duct fans
  • Roof hoods and cowls
  • Fire dampers and valves

 

Moreover, our products are tested and certified by:

RISE - Research Institutes of Sweden AB Certification (former SITAC)
Air Tightness Certificate for Ventilation Ductwork System - air tightness class D according to EN 12237:2003 - round spiral ducts and ductwork fittings with seals.

The Building Information Foundation RTS sr
M1 Cleanliness class for air handling components:

  • Ventilation spiral ducts
  • Pressed bends, reducers, T-pieces and take-offs
  • Segmented bends, reducers, T-pieces, take-offs, male couplings, offsets
  • Air dampers: regulating, shut-off, iris, multi blade

TÜV Rheinland Polska
Certificate of production quality:

  • Round ventilation ducts and fittings
  • Mounting accessories
  • Regulating, shut-off, non-return and iris dampers
  • Ventilation silencers

Instytut Techniki Budowlanej ITB (The Building Research Institute)
Technical approvals and certificates of constancy of performance

  • STRUT assembly system
  • Suspended mounting elements
  • Flexible ducts - fire classification
  • Fire dampers

Passive House Institute
Certificate for HRU-PremAIR-450 heat recovery unit confirming compliance with the highest energy efficiency requirements.

...
and many others.

 

czytaj więcej

2018-05-15Прямоугольные регуляторы переменного расхода воздуха VAV

Прямоугольные регуляторы  переменного расхода воздуха VAV

NEW - Rectangular/ Square Volume Flow Regulator (VAV):

  • High air flow measurement accuracy,
  • The casing is made of Z275 galvanized sheet,
  • Optionally, the casing can be made of the 1.4301 stainless steel,
  • Operating temperature range from 0 to 50 [˚C],
  • Possibility to measure current air flow parameters using external micromanometers.

czytaj więcej

2018-03-06NEW - PremAIR from Alnor

NEW - PremAIR from Alnor

NEW - Heat recovery unit PremAIR-450:

  • Heat recovery up to 93%,
  • Free-cooling and Free-heating functions,
  • Wireless control via a mobile application (Android and iOS systems),
  • Lightweight design - only 32kg,
  • CO2 and RH sensors (optional).

czytaj więcej

2018-03-05Meet us at Mostra Convegno!

Meet us at Mostra Convegno!

ALNOR Ventilation Systems once again will be an exhibitor on the Mostra Covegno. 

In 2018 You will see new product like: circular and square fire dampers, CAV and VAV regulators, chemically resistant ducts and fittings.

You are welcome in Hall 22, stand S53 to talk with us about cooperation.

czytaj więcej

2018-02-21Smog alert - Clear air at Home with our smog filter

Smog alert - Clear air at Home with our smog filter

NEW - SMOG duct filter box in Alnor's offer:

  • the filtration efficiency of PM2.5 particles reaches up to 73%, and PM10 particles up to 81%,
  • the filter box consists of an airtight galvanised box and two filters: prefilter and smog filter,
  • casing tightness is ensured with EPDM gasket,
  • a perfect solution for domestic ventilation and heat recovery systems.

czytaj więcej
REKUPERACJA
PROJEKTOWANIE