Монтаж ветиляционных систем     

Guide - Chemical-resistant ventilation

Guide - Chemical-resistant ventilation

Guide - Chemical-resistant ventilation

Plastic Ventilation Ductwork Guide. Find out what is a chemically resistant ventilation system, where can You use it and what types of ventilation ducts are available. Learn how join and  install plastic ducting. Select correct material and check its chemical properties.

Manual - How to glue PVC ventilation pipes and fittings

Manual - How to glue PVC ventilation pipes and fittings

Manual - How to glue PVC ventilation pipes and fittings

Do You know that You can join PVC vent pipes using special glue? To be precise You can glue ventilation pipes and fittings up to a diameter of 250mm. Glueing is a popular method of joining PVC ventilation systems because it's rather simple and requires no special tools as in the case of extrusion welding or wire welding (see How-to: Welding plastic ventilation ductwork). However, in order to make a solid and tight joint of PVC pipes and fittings, we must properly prepare the duct components for the process of glueing and follow the recommendations of the special glue manufacturer. Find out How to properly glue PVC ducts and fittings - Read our Manual!

Good practices  - assembly, transportation and storage of SPIRAL system

Good practices - assembly, transportation and storage of SPIRAL system

Good practices - assembly, transportation and storage of SPIRAL system

How to install spiral ductwork? How to cut circular ducts? How to transport spiral ducts safely? Read our Good practices and find answers on these and more questions concerning installation, transport and storage of spiral ducts.

 

User's Manual - Assembly of LDS linear diffuser

User's Manual - Assembly of LDS linear diffuser

User's Manual - Assembly of LDS linear diffuser

Linear slot diffusers(LDS) can be ceiling or wall mounted. Linear slot diffusers were designed to supply warm/cold air. They are available in versions with 1 to 4 slots and with the lengths of 495 and 990 mm.

 

User's Manual - Assembly of KNG gypsum diffuser

User's Manual - Assembly of KNG gypsum diffuser

User's Manual - Assembly of KNG gypsum diffuser

The KNG gypsum ventilation diffuser is designed for installation in ceilings made of plasterboard.

It can be painted in any colour to match the chosen aesthetic of the room.

User's Manual - Alnor Actuators

User's Manual - Alnor Actuators

User's Manual - Alnor Actuators

The DM-ML / DM-FL actuator enables remote operation of a ventilation damper. The actuators with 5, 6 and 8 Nm of torque are the most popular choice for ventilation dampers. The torque of 6 Nm allows opening dampers with the crosssectional surface area up to 1.5 m2; they can be installed on ventilator dampers up to 400 mm in diameter. The DM-ML -...- S actuator has an additional limit switches, which can signal the damper position in the range of 0-10-80-90. Precise, variable control of damper position is obtained by mounting the DM-ML -...- RS actuator, which operates by means of current signal 0 (4) -20mA or voltage signal 0 (2) -10V.

REKUPERACJA
PROJEKTOWANIE
x
Alnor Ventilation Systems
Aleja Krakowska 10
05-552 Wola Mrokowska
Польша

tel. +48 22 737 40 00